PowerDock Rear Panel
Quick Start Guide
Thank you for purchasing Griffin’s PowerDock for Sansa, the most convenient way
to charge and sync your Sansa to your USB-equipped personal computer.
Mini-USB Audio out
Using PowerDock with your personal computer:
1. This PowerDock package includes 3 adapters for use with different Sansa models.
The adapter for Sansa e200 series is pre-installed. Insert the appropriate adapter
for your Sansa model. For example, if you have a Sansa c250, use the c200 series
adapter. The adapters are labeled, on their backs, by Sansa series number.
• Height: 45 mm
• Width: 97 mm
• Length: 74 mm
• Weight: 4.2 oz
• Power: Provided by USB port on computer, with included cable
2. Connect the included USB mini-B cable to PowerDock’s mini-USB port. Plug the
other end of the USB cable into an available USB port on your computer. PowerDock’s
blue LED will light up to show that it is connected.
3. Slip your Sansa into PowerDock’s cradle. Your Sansa will begin to sync with your
computer as usual.
Visit Griffin Support online:
4. PowerDock will also charge your Sansa’s battery while it is docked. (Please note
that C140 and C150 players are not rechargeable.)
For your convenience, PowerDock also features an audio-out port that can be used
with a standard 3.5mm (1/8") audio connector cable. For audio-out function, E200 Series
players require an external power source such as Griffin’s PowerBlock for Sansa. For
other Sansa models, an external power source is also recommended to significantly
conserve battery life when using the audio out port.
PowerDock is a trademark of Griffin Technology, Inc. Sansa is a trademark of SanDisk Corporation.
FRONT
PowerDock QS.ai
09/27/06 2PM
MAM
|