Industrial Communications Worldwide
Industrial Ringdown/Autodialer Telephone
Model HR71
Installation & Operation
P004205 Rev. B 11/23/2004 10:34
7552 - 10th Street N.E. Calgary, Alberta, Canada T2E 8W1
Guardian Telecom Inc.
Installation and Operation
Model HR71
Overview
HR 71 Industrial Ringdown/Autodialer Telephone
The HR71 is a rugged industrial telephone designed to provide safe, reliable, point to point
communication in harsh environments such as refineries, mills, plants, warehouses or areas with
high humidity.
The HR71 Telephone may be supplied with an optional Auto Dialer or dialing may be programmed
through a PABX. If an Auto Dialer is ordered with the HR71 refer to the manual for the Auto Dialer
for instructions on programming and for compliances.
Features
Enclosure
•
16 AWG steel, zinc chromate plated and powder coated
Epoxy Resin Coating
•
•
encapsulates all parts on main circuit board
resistant to corrosive agents (eg. H2S, SO2, and NH3), and high
humidity
Magnetic Reed Hook Switch
no moving parts
•
Surge Arrestor
•
prevents damage to the electronic circuits in the event of a high
voltage spike on telephone line
Noise Reducing Microphone
•
allows a high level of intelligibility in locations with high background
noise.
Heavy Duty Handset Cord
withstands abusive use
•
Hearing-Aid Compatibility
•
compatible with inductively coupled hearing-aid devices
Page 3
Guardian Telecom Inc.
Installation and Operation
Model HR71
Installing the HR71
•
•
Follow all appropriate electrical codes and use only approved electrical
fittings for the installation.
See: HR71 Drawing,
Choose a wall location that is free of obstructions and permits space for ½”
NPT conduit runs.
•
•
Ensure mounting can support 4 lbs. (1.8 kg) and any additional foreseeable
load.
Remove the eight (8) cover screws from the front of the unit and carefully
remove the front cover assembly. NOTE that the handset and all
electronics are attached to the front plate. The front cover may be
separated from the back box by disconnecting the harness plugs.
See: HR71 Drawing,
•
•
Attach the back box to the wall at the desired location using four (4) #8
screws. If weather resistance is important in your application select
washers that will assist in sealing the mounting holes.
Connect cable or conduit (1/2 inch trade size) to the entrance at the bottom
of the unit.
•
•
Connect an approved earth ground to the terminal block.
Bring cable into the enclosure through the conduit entrance and attach
individual wires from the exchange (Tip/Ring/Ground) to the connector (Tip
& Ring are not polarity sensitive). If a conduit hub is used, ensure it is
grounded to the ground stud.
•
•
Apply power to the system.
The HR71 Telephone may be supplied with an optional Auto Dialer or
dialing may be configured by the PABX. If an Auto Dialer is ordered with
the HR71, refer to the manual for the Auto Dialer for instructions on
programming and for compliances.
•
•
Test the unit by calling to and from another unit on the exchange.
Operating the HR71
The HR71 Ringdown/Autodialer phone is designed for automatic calling
simply by removing the handset from the cradle.
Page 5
Guardian Telecom Inc.
Installation and Operation
Model HR71
Engineering Specifications
ELECTRICAL PERFORMANCE
AUDIBLE RANGE FREQUENCY RESPONSE
TRANSMIT OBJECTIVE LOUDNESS RATING (TOLR)
RECEIVE OBJECTIVE LOUDNESS RATING (ROLR)
SIDE TONE OBJECTIVE LOUDNESS RATING (SOLR)
RINGER OUTPUT
300 – 3400 HZ
-41 +/- 4 dB
TYPICAL 52 +/- 3 dB
TYPICAL 11 +/- 4 dB
>80 dB
FCC RINGER EQUIVALENCE
0.9B
SET IMPEDANCE
600 OHMS NOMINAL
MAXIMUM LOOP
15,000 FEET (4,600 METERS) OF 22 AWG
COPPER
ELECTRICAL REQUIREMENTS
RINGER SENSITIVITY
LINE VOLTAGE
40 – 100 V, 16 – 25 HZ
24 – 56 VDC
LOOP CURRENT
20 - 120 MA
CONNECTION METHOD
ENVIRONMENTAL
SURGE ARRESTOR / TERMINAL BLOCK
WEATHERPROOF
ENCLOSURE NEMA 3R
-40O TO +50O C
TEMPERATURE
MECHANICAL
HOOK SWITCH (CRADLE SWITCH) LIFE
BODY CONSTRUCTION
>1 000 000 OPERATIONS
16 GAUGE STEEL, ZINC CHROMATE PLATED
AND POWDER COATED
DIMENSIONS
9 X 5 X 5.2 INCHES (229 X 127 X 132 MM)
4 LBS (1.82 KG)
NET WEIGHT
HANDSET MATERIAL
MICROPHONE
HIGH IMPACT ABS
NOISE REDUCING ELECTRET
NOISE CANCELING DYNAMIC
HEARING AID COMPATIBLE
VERTICAL WALL
OPTIONAL MICROPHONE
RECEIVER
STANDARD MOUNTING
CONNECTION FITTINGS
7/8” DIAM. OPENING FOR OWNER SUPPLIED
FITTING
HARDWARE MATERIAL
STAINLESS STEEL
Page 6
Guardian Telecom Inc.
Installation and Operation
Model HR71
Warranty
Guardian Telecom warrants your product to be free of defects in material and workmanship for a period
of one year. Guardian Telecom will repair or replace any defective unit that is under warranty
This warranty is null and void if any non-authorized modifications have been made to this product, or if
it has been subjected to misuse, neglect, or accident. This warranty covers bench repairs only; such
repairs must be made at Guardian Telecom or an authorized service depot. Guardian Telecom is not
responsible for costs incurred for on-site service calls, freight, or brokerage.
A return authorization must be obtained prior to warranty claims or repairs.
Disclaimer
The products covered by this manual are designed for use in Industrial Environments and/or Hazardous
Locations. Due to the range of possible applications for these instruments the manufacturer will not be
responsible for damages or losses of any kind suffered as a result of the use of this product, including
consequential damages.
Warning
This device may be opened and reassembled by qualified personnel only, for the purposes of installing
the product and replacing fuses, following the instructions in the product manual.
High voltages may be present in this product when connected to telephone wiring.
Service Telephone Number
1-800-363-8010
Guardian Telecom provides a customer service telephone number which is toll-free within North
America. If you need assistance when installing or operating this product, please call the toll-free
telephone number between regular business hours (8:00AM-5:00PM), Mountain Standard Time. If you
are calling outside of regular business hours, please leave a detailed message, and a member of
Guardian Telecom’s Service Department will return your call as soon as possible. If your product
requires service, Guardian personnel will supply you with an RMA (return materials authorization)
number over the telephone or through our web site product return page. This number must be included
with your return address and the name of the person to contact.
Guardian Telecom Inc.
7552 - 10th Street N.E.
Calgary, Alberta, Canada T2E 8W1
Toll-free 1-800-363-8010
Ph. (403) 258-3100
Fax. (403) 253-4967
Feedback
Guardian Telecom continually strives to make reliable, durable, and easy to use products. If you, as an
installer or user of our equipment, have any suggestions for improvements to this or any of our products
or documents, including this manual, we would appreciate hearing from you.
Page 7
Guardian Telecom Inc.
Installation and Operation
Model HR71
Guardian Product Return
Guardian products have been quality tested and are in full working order when shipped from
the factory, given the rugged nature of these products, shipping is not expected to damage a
unit. In the unlikely event of a malfunction, Guardian follows the three step procedure below.
Step I - On-Site Correction
•
•
•
The most common source of difficulties with a new product is improper installation in one of
two ways: incorrect wiring connections or connection to an incorrect power source.
Product wiring needs to be properly connected to the on-site wiring. Correct wiring
instructions are shown in the user manual included with the product.
Connecting a telephone to a standard power source, rather than tip & ring, will blow the
telephone’s internal, user-replaceable fuse. In the event of fuse burn-out, disconnect the
telephone from the power source, replace the fuse, and reconnect following the wiring
diagrams provided with the product.
Step II - Return Materials Authorization (RMA)
•
When a product has been installed following user manual instructions, and the unit fails to
operate, the user must contact Guardian Telecom to obtain authorization to return the
product. This can be done by completing a RMA form online at
manual.
•
•
•
After providing information on the product, the owner and the nature of the problem,
Guardian will issue a RMA number, to be shown on documentation returned with the
product.
In addition to the RMA number, shipping documents should include name, address and
telephone number of the owner along with contact information for the person responsible
for the repair and/or the user who identified the malfunction.
(Where a product is being returned for repair from outside of Canada, customs
documentation must show the product’s serial number, date of export [date of purchase],
and a notation that the equipment is: “Canadian goods returning.”)
Step III - Factory Authorized Service
•
Once received, each product is carefully inspected and tested. If the product is under
warranty, repairs are completed and the product returned to the owner, generally within
five working days of receipt by the factory.
•
A product that has been subjected to misuse, neglect or accident or is beyond the warranty
period will be evaluated. The service department will provide the owner’s representative
with a repair cost estimate. Once approved, repairs are completed and the product
returned, generally within five working days.
Page 8
Guardian Telecom Inc.
Installation and Operation
Model HR71
Notes:
Model No.
Part No.
Serial No.
Date of Purchase
Page 9
Guardian Telecom Inc.
7552 - 10th Street N.E.
Calgary, Alberta, Canada T2E 8W1
Toll-free 1-800-363-8010
Ph. (403) 258-3100
Fax. (403) 253-4967
E-mail: [email protected]
Industrial Communications Worldwide
© Guardian Telecom Inc. 2004
|