HANNspree Car Video System HL226 User Manual

HL226 (HSG1283)  
 
User’s Manual  
OSD[V6.0]  
Before operating the monitor, please read this manual thoroughly. This manual should be retained for  
future reference.  
This device complies with requirement of EMC directive 2004/108/EC with regard to  
Electromagnetic Compatibility, and 2006/95/EC and 93/68/EEC with regard to Low Voltage  
directive.  
Socket-outlet shall be near the equipment and shall be accessible.  
Trademark Notice:  
Hanns.G products incorporate High-Definition Multimedia Interface  
(HDMI TM) technology.  
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are  
trademarks or registered trademarks of HDMI Licensing LLC in the United States and other  
countries.  
2
 
User’s Manual  
Congratulations!  
This display is designed for both you and the planet!  
The display you have just purchased carries the TCO  
Certified label. This ensures that your display is designed,  
manufactured and tested according to some of the  
strictest quality and environmental requirements in the  
world. This makes for a high performance product,  
designed with the user in focus that also minimizes the  
impact on the climate and our natural environment.  
TCO Certified is a third party verified program, where every product model is tested by an accredited  
impartial test laboratory. TCO Certified represents one of the toughest certifications for displays  
worldwide.  
Some of the Usability features of the TCO Certified for displays:  
Good visual ergonomics and image quality is tested to ensure top performance and reduce sight  
and strain problems. Important parameters are luminance, contrast, resolution, black level,  
gamma curve, color and luminance uniformity, color rendition and image stability  
Product have been tested according to rigorous safety standards at an impartial laboratory  
Electric and magnetic fields emissions as low as normal household background levels  
Low acoustic noise emissions  
Some of the Environmental features of the TCO Certified for displays:  
The brand owner demonstrates corporate social responsibility and has a certified environmental  
management system (EMAS or ISO 14001)  
Very low energy consumption both in on- and standby mode minimize climate impact  
Restrictions on chlorinated and brominated flame retardants, plasticizers, plastics and heavy  
metals such as cadmium, mercury and lead (RoHS compliance)  
Both product and product packaging is prepared for recycling  
The brand owner offers take-back options  
The requirements can be downloaded from our web site. The requirements included in this label have  
been developed by TCO Development in co-operation with scientists, experts, users as well as  
manufacturers all over the world. Since the end of the 1980s TCO has been involved in influencing  
the development of IT equipment in a more user-friendly direction. Our labeling system started with  
displays in 1992 and is now requested by users and IT-manufacturers all over the world. About 50%  
of all displays worldwide are TCO certified.  
For more information, please visit  
Mandate:  
For displays with glossy bezels the user should consider the placement of the display as the bezel  
may cause disturbing reflections from surrounding light and bright surfaces.  
Optional, depend on selected model】  
3
 
User’s Manual  
RECYCLING INFORMATION  
We, at HANNspree care very much about our environment protection strategy and firmly believe that  
it helps us have healthier earth via appropriate treatment and recycling of industrial technology  
devices at the end-of-life.  
These devices contain recyclable materials, which can be re-decomposed and re-integrated into  
brand-new marvels. On the contrary, other material can be classified to hazardous and poisoned  
substances. We strongly encourage you to contact the provided information to recycle this product.  
For more information, please visit  
3
 
User’s Manual  
TABLE OF CONTENTS  
SAFETY NOTICE .................................................................................................. 6  
PRECAUTIONS................................................................................................. 6  
SPECIAL NOTES ON LCD MONITORS ...................................................... 7  
BEFORE YOU OPERATE THE MONITOR...................................................... 8  
FEATURES......................................................................................................... 8  
CHECKING THE CONTENTS OF THE PACKAGE .................................. 8  
INSTALLATION INSTRUCTIONS................................................................ 8  
POWER............................................................................................................... 9  
SETTING THE MONITOR ON THE WALL .............................................. 10  
MAKING CONNECTIONS.............................................................................11  
ADJUSTING THE VIEWING ANGLE......................................................... 12  
OPERATING INSTRUCTIONS ......................................................................... 13  
GENERAL INSTRUCTIONS......................................................................... 13  
FRONT PANEL CONTROL .......................................................................... 14  
HOW TO ADJUST A SETTINGS.................................................................. 16  
PLUG AND PLAY............................................................................................ 19  
TECHNICAL SUPPORT (FAQ) ......................................................................... 20  
Q & A FOR GENERAL PROBLEMS........................................................... 20  
ERROR MESSAGE & POSSIBLE SOLUTIONS ....................................... 22  
APPENDIX ............................................................................................................ 24  
SPECIFICATIONS.......................................................................................... 24  
5
 
User’s Manual  
SAFETY NOTICE  
1. The changes or modifications not expressly approved by the party responsible for compliance  
could void the user's authority to operate the equipment.  
2. Shielded interface cables and AC power cord, if any, must be used in order to comply with the  
emission limits.  
3. The manufacturer is not responsible for any radio or TV interference caused by unauthorized  
modification to this equipment. It is the responsibilities of the user to correct such interference.  
4. Only use attachments/accesories specified by the manufacturer.  
WARNING:  
To prevent fire or shock hazard, do not expose the monitor to rain or moisture. Dangerously high  
voltages are present inside the monitor. Do not open the cabinet. Refer servicing to qualified  
personnel only.  
PRECAUTIONS  
Do not use the monitor near water, e.g. near a bathtub, washbowl, kitchen sink, laundry tub,  
swimming pool or in a wet basement.  
Do not place the monitor on an unstable cart, stand, or table. If the monitor falls, it can injure a  
person and cause serious damage to the appliance. Use only a cart or stand recommended by the  
manufacturer or sold with the monitor. If you mount the monitor on a wall or shelf, use a  
mounting kit approved by the manufacturer and follow the kit instructions.  
Slots and openings in the back and bottom of the cabinet are provided for ventilation. To ensure  
reliable operation of the monitor and to protect it from overheating, be sure these openings are not  
blocked or covered. Do not place the monitor on a bed, sofa, rug, or similar surface. Do not place  
the monitor near or over a radiator or heat register. Do not place the monitor in a bookcase or  
cabinet unless proper ventilation is provided.  
The monitor should be operated only from the type of power source indicated on the label. If you  
are not sure of the type of power supplied to your home, consult your dealer or local power  
company.  
Unplug the unit during a lighting storm or when it will not be used for long period of time. This  
will protect the monitor from damage due to power surges.  
Do not overload power strips and extension cords. Overloading can result in fire or electric shock.  
Never push any object into the slot on the monitor cabinet. It could short circuit parts causing a  
fire or electric shock. Never spill liquids on the monitor.  
Do not attempt to service the monitor by yourself; opening or removing covers can expose you to  
dangerous voltages and other hazards. Please refer all servicing to qualified service personnel.  
The wall socket shall be installed near the equipment and shall be easily accessible.  
6
 
User’s Manual  
SPECIAL NOTES ON LCD MONITORS  
The following symptoms are normal with LCD monitor and do not indicate a problem.  
Due to the nature of the fluorescent light, the screen may flicker during initial use. Turn off the  
Power Switch and then turn it on again to make sure the flicker disappears.  
You may find slightly uneven brightness on the screen depending on the desktop pattern you use.  
The LCD screen has effective pixels of 99.99% or more. It may include blemishes of 0.01% or  
less such as a missing pixel or a pixel lit all of the time.  
Due to the nature of the LCD screen, an afterimage of the previous screen may remain after  
switching the image, when the same image is displayed for hours. In this case, the screen is  
recovered slowly by changing the image or turning off the Power Switch for hours.  
If the screen suddenly flashes erratically or the backlighting fails, please contact your dealer or  
service center for repair. Do not attempt to repair the monitor yourself.  
7
 
User s Manual  
BEFORE YOU OPERATE THE MONITOR  
FEATURES  
54,6cm / 21.5  
Wide Screen TFT Color LCD  
Monitor  
Crisp, Clear Display for Windows  
EPA ENERGY STAR®  
GP Green Product  
Ergonomic Design  
Space Saving, Compact Case Design  
CHECKING THE CONTENTS OF THE PACKAGE  
The product package should include the following items:  
LCD Monitor  
Cables and User manua  
l
Quick Start Guide  
Power Cord  
VGA Cable  
Warranty Card  
Audio Cable  
DVI Cable  
(optional)  
HDMI to DVI Cable  
(optional)  
HDMI Cable  
(optional)  
8
 
User’s Manual  
INSTALLATION INSTRUCTIONS  
INSTALL  
REMOVE  
Figure.1. Installing and Removing the Base  
INSTALLATION:  
1. Align the monitor with the opening in the base.  
2. Note that the longer section of the base points forward.  
3. Snap the monitor into its base. A clear click sound will affirm that the base is connected  
correctly.  
4. Verify that the monitor is securely attached to the base by looking at the bottom of the base and  
making sure that the clips are fully engaged in the base.  
REMOVAL:  
1. Flip over the monitor so that it is upside down.  
2. Press the button on the arm that holds the monitor in place.  
3. Gently pull the base from the monitor until they are unattached.  
POWER  
POWER SOURCE:  
1. Make sure that the power cord is the correct type required in your area.  
2. This LCD monitor has an Internal universal power supply that allows operation in either  
100/120V AC or 220/240V AC voltage area (No user adjustment is required.)  
3. Connect the AC-power cord one end to your LCD monitor’s AC-input socket, the other end to  
wall-outlet.  
9
 
User’s Manual  
SETTING THE MONITOR ON THE WALL  
DISSEMBLING THE STAND BASE:  
1. Disconnect all the cables and cords from the Monitor to prevent breakage.  
2. Carefully place the Monitor face down on a soft and flat surface (blanket, foam, cloth, etc) to  
prevent any damage to the Monitor.  
3. Remove the two (2) screws so that the stand base can be removed.  
4. Gently remove the stand base.  
(For reference only)  
WALL MOUNTING THE MONITOR:  
1. Purchase a VESA compatible wall bracket:  
VESA 100 100, 4 holes, M4, 8mm, 8kg.  
×
2. Locate your ideal Monitor position on the wall.  
3. Fix the wall bracket firmly on the wall.  
4. Secure the Monitor to the bracket using the 4 mount  
holes on the back and center of the Monitor.  
Note:  
Please read the instructions of your specific wall bracket to properly wall mount the Monitor.  
The pitch of the mounting holes is 100mm horizontally and 100mm vertically.  
The screws type required is metric: M4, 8mm length.  
The Monitor stand base can be screwed on a table or a hard surface using the hole on the back of  
the stand base.  
For use only with UL listed wall mount bracket.  
*Installing the LCD Monitor requires special skill that should only be performed by qualified service  
personnel. Customers should not attempt to do the work themselves. Hanns.G bears no responsibility  
for improper mounting or mounting that results in accident or injury. You can ask a qualified service  
personnel about using an optional bracket to mount the Monitor to the wall.  
10  
 
User’s Manual  
MAKING CONNECTIONS  
CONNECTING TO A PC  
Turn off your computer before performing the procedure below.  
1. Connect one end of the VGA cable to the back of the monitor and connect the other end to the  
computer’s VGA port.  
2. Connect one end of the DVI cable (optional) to the back of the monitor and connect the other end  
to the computer’s DVI port.  
3. Connect one end of the HDMI to DVI cable (optional) to the back of the monitor and connect the  
other end to the computer’s DVI port.  
4. Connect one end of the HDMI cable (optional) to the back of the monitor and connect the other  
end to the computer’s HDMI port.  
5. Connect the audio cable between the monitor's audio input and the PC's audio output (green  
port).  
6. Plug one end of the AC power cord to the LCD monitor’s AC input socket, and the other end to  
Wall outlet.  
7. Turn on your monitor and computer.  
Figure.2. Connecting to a PC  
1
3
5
Earphone  
2
4
6
LINE IN  
VGA Input  
HDMI Input  
DVI Input  
Power AC Input  
11  
 
User’s Manual  
ADJUSTING THE VIEWING ANGLE  
For optimal viewing it is recommended to look at the full face of the monitor, then adjust the  
monitor’s angle to your own preference.  
Hold the stand so you do not topple the monitor when you change the monitor’s angle.  
You are able to adjust the monitor’s angle from -5° to 15°.  
Monitor Angle  
Figure.3.  
NOTES:  
Do not touch the LCD screen when you change the angle. It may cause damage or break the LCD  
screen.  
Be careful not to place fingers or hands near the hinges when tilting the monitor, otherwise  
pinching can result.  
12  
 
User’s Manual  
OPERATING INSTRUCTIONS  
GENERAL INSTRUCTIONS  
Press the power button to turn the monitor on or off. The other control buttons are located on the  
front panel of the monitor (See Figure 4). By changing these settings, the picture can be adjusted to  
your personal preferences.  
The power cord should be connected.  
Connect the Signal cable from the monitor to the VGA card.  
Press the power button to turn on the monitor. The power indicator will light up.  
Menu / Return  
[]  
Brightness adjustment button  
[]  
Volume adjustment button  
Auto adjustment/ Enter  
Analog Input Models》  
Input source change/ Enter  
Digital Input Models》  
Power Button  
Figure.4. Control Panel Buttons  
13  
 
User’s Manual  
FRONT PANEL CONTROL  
Power Button:  
Press this button to switch ON/OFF of monitor’s power.  
Power Indicator:  
Green — Power On mode.  
Flicker — Power Saving mode.  
MENU / RETURN:  
Turn the OSD menu on/off or return to the previous menu.  
Adjust ▲▼:  
1. Adjust Brightness and volume when the OSD is off.  
2. Navigate through adjustment icons when OSD is ON or adjust a function when function is  
activated.  
i Button: Analog Input Models》  
1. The OSD menu is used asconfirmationfunction during start-up.  
2. The Auto adjustmentfunction works only for VGA input. (The auto adjustment function is  
used to optimize the horizontal position, vertical position,clock,and phase.)  
i Button: Digital Input Models》  
1. Pressi to enter Source selections. (Selections include VGA, HDMI, etc. The actual  
selections may very depending on the models. This function is only available in models with  
digital inputs)  
2. The OSD menu is used asconfirmationfunction during start-up.  
3. Press and hold this button more than 3 seconds will start Auto Adjustfunction when using  
VGA input only. (The auto adjustment function is used to optimize the horizontal position,  
vertical position,clock,and phase.)  
Hotkeys:  
1. Restore Brightness and Contrast defaults:  
To reset both the Brightness and Contrast to their default values, press theandkeys  
at the same time.  
2. ASPECT RATIO:  
PressMENU+key to change to FULL MODEor FIT MODE.  
3. Change Resolution:  
For similar screen display resolutions (see table below), the screen resolution can be changed by  
pressing theMENU+button to achieve the optimal display quality.  
4. Change Preset Mode: [The availability of this function depends upon the selected model] Press  
MENUkey for 3 seconds to select one of the following modesPC,MOVIE,  
GAME,ECO. Default isPC.  
14  
 
User’s Manual  
Resolution  
640×400@70Hz ↔ 720×400@70Hz  
640×400@85Hz ↔ 720×400@85Hz  
640×480@60Hz ↔ 720  
1024×768@70Hz ↔ 1280×768@70Hz  
1280×768@60Hz ↔ 1360 768@60Hz  
1400 1050@60Hz 1680 1050@60Hz  
1400 1050@RB 60Hz 1680 1050@RB 60Hz  
1400 1050@75Hz 1680 1050@75Hz  
1440 900@60Hz 1600 900@60Hz  
768@60Hz 1366 768@60Hz  
960@60Hz 1600 900@60Hz  
×480@60Hz  
×
×
×
×
×
×
×
×
×
1360  
1280  
×
×
×
×
** The screen resolutions available will depend on the purchased model.  
NOTES:  
Do not install the monitor in a location near heat sources such as radiators or air dusts, or in a  
place subject to direct sunlight, or excessive dust or mechanical vibration or shock.  
Save the original shipping box and packing materials, as they will come in handy if you ever have  
to ship your monitor.  
For maximum protection, repackage your monitor as it was originally packed at the factory.  
To keep the monitor looking new, periodically clean it with a soft cloth. Stubborn stains may be  
removed with a cloth lightly dampened with a mild detergent solution. Never use strong solvents  
such as thinner, benzene, or abrasive cleaners, since these will damage the cabinet. As a safety  
precaution, always unplug the monitor before cleaning it.  
15  
 
User’s Manual  
HOW TO ADJUST A SETTINGS  
BRIGHTNESS/ CONTRAST  
Adjust the brightness value of the display according to your  
preference. SelectBRIGHTNESSoption to adjust the  
brightness value.  
BRIGHTNESS  
CONTRAST  
Adjust the contrast value of the display according to your  
preference. SelectCONTRASToption to adjust the contrast  
value.  
Optimal setting for high contrast images or videos. The dark and  
light areas of the image are automatically detected, and the  
contrast is enhanced to provide a clearer, sharper image. Also,  
you may select theACTIVE CONTRASToption.  
ACTIVE CONTRAST  
Select the preset mode according to your preference: PC/  
MOVIE/ GAME/ ECO  
[The availability of this function depends upon the selected  
model]  
PRESET MODE  
INPUT SETTING  
INPUT SETTING  
Select the INPUT SETTINGoption to change between analog  
(VGA) or Digital (DVI) source. Enter the option and select  
Analog or Digital. [Dual input mode optional]  
From the Signal Selection menu, select the AUTO SEARCH」  
option to activate or deactivate the automatic signal search  
function. [For DVI/ HDMI Input only]  
AUTO SEARCH  
COLOR SETTING  
WARM  
NATURE (6500K)  
COOL  
Adjust the color temperature value of the display according to  
your preference: WARM /NATURE/ COOL.  
Move the cursor to the User option and select it,  
1. To adjust the red, enter theRoption and adjust the level.  
2. To adjust the green, enter theGoption and adjust the level.  
3. To adjust the blue, enter theBoption and adjust the level.  
USER  
IMAGE SETTING  
AUTO ADJUST  
The auto adjustment function is used to optimize the  
H-POSITION,V-POSITION, CLOCK,andPHASE.  
[For VGA Input only]  
When the aspect ratio of screen is distorted, you may make  
ASPECT RATIO  
adjustments by using this function.FULLindicates full screen  
16  
 
User’s Manual  
display, which does not ensure the image is shown as is or in  
initial scale.FITindicates scaling by the proportion of original  
images, which may cause the screen showing black bands. [The  
availability of this function depends upon the selected model]  
Select theH-POSITIONoption to shift the screen image to the  
left or right. Enter the option and adjust the level. [For VGA  
only]  
H-POSITION  
V-POSITION  
Select the V-POSITIONoption to shift the screen image up or  
down. Enter the option and adjust the level. [For VGA only]  
Select the CLOCKoption to reduce the vertical flicker of  
characters on the screen. Enter the option and adjust the level.  
[For VGA only]  
CLOCK  
Select thePHASEoption to reduce the horizontal flicker of  
characters on the screen. Enter the option and adjust the level.  
[For VGA only]  
PHASE  
Select theSHARPNESSoption to adjust the sharpness of the  
display. Set the value from -2 to 2.  
SHARPNESS  
ChooseVIDEO MODEor PC MODEfor video  
transmission. While using HDMI or HDMI to DVI ports for  
video transmission, the video will appear cut off slightly around  
the edge; choosePC MODEto view videos with complete  
image. (VIDEO MODE only functions for inputs from HDMI or  
DVI that supports HDCP video (YUV format))  
VIDEO MODE  
Setup the display response time through the Response time  
function. Available settings are MINIMUM,  
INTERMEDIATE, and MAXIMUM. [This feature is limited to  
specific models only.]  
RESPONSE TIME  
OSD SETTING  
LANGUAGE  
Select LANGUAGEoption to change the language of the  
OSD. Enter the option and select a language. [Reference only,  
the OSD Language depends on the selected model]  
SelectH-POSITIONoption to adjust the horizontal position of  
H-POSITION  
the OSD. Enter the option and adjust the level.  
Select V-POSITIONoption to adjust the vertical position of  
the OSD. Enter the option and adjust the level.  
V-POSITION  
Select TRANSPARENCYoption to adjust the transparency of  
TRANSPARENCY  
17  
 
User’s Manual  
the OSD. Enter the option and adjust the level.  
Select OSD TIME-OUToption to set the OSD time out from  
OSD TIME-OUT  
10 to 100 seconds. Enter the option and adjust the level.  
To choose the color combination of the OSD window, select  
OSD COLORoption under OSD SETTINGmenu, choose  
modes 1/2/3.  
OSD COLOR  
SYSTEM  
While transferring via the HDMI port, it is recommended to set  
AUDIO INPUT to HDMI; if no sound is outputted, it is  
recommended to select AUDIO INPUT as PC, and make sure the  
PC audio output cable is connected to monitor’s LINE IN (or  
AUDIO IN) port. [For HDMI Input only]  
AUDIO INPUT  
VOLUME  
Select the VOLUMEoption to change the volume level. Enter  
the option and adjust the level. [This function applies only to  
models with incorporated audio.]  
By high volume, risk of hearing damage exists.  
Select theMUTEoption to switch the function On or Off. [The  
availability of this function depends upon the selected model.  
Adjusting the volume while muted cancels Mute mode.]  
MUTE  
Select the DDC/CIoption to switch the function On or Off.  
DDC/CI  
[Dual input mode optional]  
Select the FACTORY RESEToption to reset to the monitor’s  
default setting. This will erase the current settings. Enter the  
option and select On or Off.  
FACTORY RESET  
INFORMATION  
Display Horizontal frequency/Vertical frequency/Resolution  
information.  
18  
 
User’s Manual  
PLUG AND PLAY  
Plug & Play DDC2B Feature  
This monitor is equipped with VESA DDC2B capabilities according to the VESA DDC STANDARD.  
It allows the monitor to inform the host system of its identity and, depending on the level of DDC used,  
communicate additional information about its display capabilities. The DDC2B is a  
bidirectional data channel based on the I C protocol. The host can request EDID information over the  
DDC2B channel.  
THIS MONITOR WILL APPEAR TO BE NON-FUNCTIONAL IF THERE IS NO VIDEO  
INPUT SIGNAL. IN ORDER FOR THIS MONITOR TO OPERATE PROPERLY, THERE  
MUST BE A VIDEO INPUT SIGNAL.  
19  
 
User’s Manual  
TECHNICAL SUPPORT (FAQ)  
Q & A FOR GENERAL PROBLEMS  
PROBLEM & QUESTION  
POSSIBLE SOLUTION  
*Check if the Power Switch is in the ON position.  
*Power Cord should be connected.  
Power LED is not on  
*Check if the PC system is Plug & Play compatible.  
*Check if the Video Card is Plug & Play compatible.  
*Check if any plug pins on the VGA or DVI  
connector are bent.  
No Plug & Play  
*Adjust the Contrast and Brightness Controls.  
The display is too dark or too bright.  
Picture bounces or a wave pattern is  
present in the picture  
*Move electrical devices that may cause electrical  
interference.  
*Computer Power Switch should be in the ON  
position.  
*Computer Video Card should be snugly seated in its  
slot.  
*Make sure monitor’s video cable is properly  
connected to the computer.  
The power LED is ON (Flicker) but  
there’s no video or no picture.  
*Inspect monitor’s video cable and make sure none  
of the pins are bent.  
*Make sure computer is operational by hitting the  
CAPS LOCK key on the keyboard while observing  
the CAPS LOCK LED. The LED should either turn  
ON or OFF after hitting the CAPS LOCK key.  
*Inspect the monitor’s video cable and make sure that  
none of the pins are bent.  
Missing one of the primary colors (RED,  
GREEN, or BLUE)  
Screen image is not centered or sized  
properly.  
* Adjust pixel frequency CLOCK and PHASE or  
press hot-key ( i Button).  
Picture has color defects  
*Adjust RGB color or select color temperature.  
(White does not look white)  
*Use win 2000/ME/XP Right click anywhere on  
desktop and select Properties>Settings>Screen  
Resolution. Use the silder to adjust the reslution  
and click Apply.  
The screen resolution needs to be adjusted  
*Make sure PC audio output cable is connected to  
screen’s LINE IN port (or AUDIO IN port).  
No sound is outputted from monitor’s  
built-in speaker  
*Make sure the sound volume adjustment can be  
clearly identified.  
*Make sure the System > Silence option in the  
monitor menu is on.  
*While transferring via HDMI port but no sound is  
outputted, it is recommended to select AUDIO  
20  
 
User s Manual  
INPUT as a PC option, and make sure PC audio  
output cableis connected to  
port(or AUDIO IN port).  
m
oni  
to  
r
’s  
LINE  
IN  
Addendum related to Windows 7/Windows8  
When you encounter display problem under Windows 7/Windows8, you need to do the following:  
1. Make sure your PC computer (Hardware requirement) can support Windows 7/Windows8.  
2. Make sure your video card can run Windows 7/Windows8.  
3. If your video card can support Windows 7/Windows8, need to install the latest Win 7/Win8  
driver of your video card.  
Suggest to do the following:  
1. Install the latest Windows 7 /Windows8 video driver of your video card.  
2. Try to use the recommended display resolution that is supported by the monitor.  
3. If the recommended display resolution is not working, try the second recommended display  
resolution.  
1
2
35,56cm / 14  
39,6cm / 15.6  
(16:9)  
1366×768@60Hz  
1366×768@60Hz  
1366×768@60Hz  
1440×900@60Hz  
1366×768@60Hz  
1280×1024@60Hz  
1440×900@60Hz  
1600×900@60Hz  
1680×1050@60Hz  
1366×768@50Hz  
1366×768@75Hz  
1366×768@50Hz  
1440×900@75Hz  
1366×768@75Hz  
1280×1024@75Hz  
1440×900@75Hz  
1600×900@50Hz  
1680×1050@50Hz  
(16:9)  
40,64cm / 16  
43,2cm / 17  
(16:9)  
(16:10)  
(16:9)  
(5:4)  
(16:10)  
47cm / 18.5  
48,3cm / 19  
48,3cm / 19  
51cm / 20  
56cm / 22  
(16:9)  
(16:10)  
54,6cm / 21.5  
(16:9)  
58,4cm / 23  
60cm / 23.6  
62,5cm / 24.6 (16:9)  
70cm / 27.5 (16:10)  
(
(
16  
16  
:
:
9
9
)
)
1920×1080@60Hz  
1920×1200@60Hz  
1920×1080@50Hz  
1920×1200@50Hz  
.
And if you still have display problem after doing the above procedure, please visit Hanns G  
support and Service Website: http://www.hannspree.eu/en/monitors  
Windows is a registered trademark of Microsoft Corporation.  
21  
 
User’s Manual  
ERROR MESSAGE & POSSIBLE SOLUTIONS  
.
CABLE NOT CONNECTED:  
1. Check that the signal-cable is properly connected, if the connector is loose, tighten the  
connector’s screws.  
2. Check the signal-cable’s connection pins for damage.  
.
INPUT NOT SUPPORT :  
Your computer has been set to unsuitable display mode, set the computer to display mode given  
in the following table.  
FACTORY PRESET TIMING TABLE:  
VERTICAL  
FREQUENCY (Hz)  
HORIZONTAL  
FREQUENCY (KHz)  
31.469  
MODE  
RESOLUTION  
1
640  
640  
640  
640  
640  
640  
720  
800  
800  
800  
800  
832  
×
400 @70Hz  
480 @60Hz  
480 @70Hz  
480 @67Hz  
480 @72Hz  
480 @75Hz  
400 @70Hz  
600 @56Hz  
600 @60Hz  
600 @72Hz  
600 @75Hz  
624 @75Hz  
768 @60Hz  
768 @70Hz  
768 @75Hz  
870 @75Hz  
70.087  
59.940  
70.004  
66.667  
72.809  
75.000  
70.087  
56.250  
60.317  
72.188  
75.000  
75.000  
60.004  
70.069  
75.029  
75.062  
75.000  
60.000  
60.000  
74.443  
59.870  
74.893  
60.020  
75.025  
60.015  
59.901  
74.984  
2
×
×
×
×
31.469  
3
36.052  
4
35.000  
5
37.861  
6
×
37.500  
7
×
×
×
×
×
×
×
×
31.469  
35.156  
37.879  
48.077  
46.875  
49.725  
48.363  
56.476  
60.023  
68.681  
67.500  
45.000  
60.000  
74.592  
47.776  
60.289  
63.981  
79.976  
47.712  
55.469  
70.635  
8
9
10  
11  
12  
13  
14  
15  
16  
17  
18  
19  
20  
21  
22  
23  
24  
25  
26  
27  
1024  
1024  
1024  
1152  
1152  
×
×
×
864 @75Hz  
1280  
1280  
1280  
1280  
1280  
×
720 @60Hz  
×
×
×
960 @60Hz  
960 @75Hz  
768 @60Hz  
×768 @75Hz  
1280  
1280  
1360  
1440  
1440  
×
1024 @60Hz  
×
1024 @75Hz  
768 @60Hz  
900 @60Hz  
900 @75Hz  
×
×
×
22  
 
User’s Manual  
28  
39  
30  
1400  
1680  
1920  
×
×
×
1050 @60Hz  
1050 @60Hz  
1080 @60Hz  
64.744  
65.290  
67.500  
59.948  
59.954  
60.000  
(Video mode)  
MODE  
RESOLUTION  
640 480p @60Hz  
720  
1
2
×
×480i @60Hz  
3
720  
×480p @60Hz  
4
720×576i @50Hz  
5
720×576p @50Hz  
6
1280×720p @60Hz  
7
1920  
1920  
×
1080i @50Hz  
8
×1080i @60Hz  
9
1920  
×1080p @50Hz  
10  
1920×1080p @60Hz  
** We ensure that the monitor can be lighted under interlace signal mode, but we can not guarantee  
the image quality.  
23  
 
User’s Manual  
APPENDIX  
SPECIFICATIONS  
Driving system  
Size  
TFT Color LCD  
54,6cm / 21.5‖ Diagonal  
LCD Panel  
Pixel pitch  
H-Frequency  
V-Frequency  
0,248mm(H)  
×0,248mm(V)  
31KHz – 83KHz  
56Hz – 75Hz  
Video  
Display Colors  
Max. Resolution  
Plug & Play  
16.7M Colors  
1920  
×1080 @60Hz  
VESA DDC2BTM  
ON Mode  
30W (Typical)  
Power Saving Mode  
OFF Mode  
≤0.5W  
Power consumption  
≤0.5W  
Audio output  
Rated Power 1.5 W rms (Per channel)  
VGA  
DVI  
Input Terminal  
HDMI  
Hor. : 476.6mm  
Ver. : 268.1mm  
Maximum Screen Size  
Power Source  
100–240V 1.0A 50-60Hz  
Operating Temp:5 to 35°CStorage  
Environmental  
Considerations  
Temp.: -20  
Humidity: 20% to 85%  
512 (W) 400(H) 203(D) mm  
20.2 (W)×15.8 (H)×8.0 (D)  
3.5 kg  
°to 60°COperating  
×
×
Dimensions  
Weight (NW)  
*** The above specification is subject to actual product specification and is subject to change  
without prior notice.  
NOTES:  
The Maximum Resolution will depends on the display card supporting. Related issue can refer to  
24  
 

Graco Baby Playpen PD197910A User Manual
Graco Inc Paint Sprayer 223963 User Manual
H2O Audio Carrying Case S2 1A2 User Manual
Haier Freezer DW 40L508 User Manual
Haier Microwave Oven 23PG27 User Manual
Haier TV DVD Combo HLC1 User Manual
Harbor Freight Tools Nail Gun 68021 User Manual
Hotpoint Ice Maker FFU3D W User Manual
HP Hewlett Packard Camcorder R740 User Manual
Impex Home Gym MWM 800 User Manual