HLA15/HLA19
LCD TV
USER MANUAL
Please read this manual carefully
before using this TV set and keep it
for future reference.
To users:
Thank you for purchasing our LCD-TV.
Before connecting the LCD-TV and turning on the power, please
read this book carefully. Please keep this book for later use.
If the unit is disabled by an electrostatic discharge, please turn off
the power to the unit and turn it back on to reset.
CONTENT
Safety Notice Items...................................................................................
Front Panel Controls..................................................................................
Connection Options...................................................................................
Remote Control Key Functions...................................................................
1
2
3
4
5
Remote Control
..................................................................................
Installing Batteries..................................................................................
5
Connection Instructions.............................................................................
Grounding..............................................................................................
External equipment Connections..............................................................
Antenna Connection.............................................................................
PC Setup.............................................................................................
VCR Setup...........................................................................................
Cable TV Setup....................................................................................
6
6
6
6
7
8
9
External AV Source Setup......................................................................
9
Basic Operating Instructions.......................................................................
10
Turn on the LCD-TV.................................................................................
10
Audio Control..........................................................................................
Mute......................................................................................................
10
10
Select the TV Channel You Want...............................................................
11
Picture Mode...........................................................................................
11
Program Scan.........................................................................................
11
Sleep......................................................................................................
11
Menu Operations.......................................................................................
Picture Menu Options...............................................................................
Picture Menu Options Continued...............................................................
Sound Menu Options................................................................................
Sound Menu Options Continued................................................................
12
12
13
13
14
Function Menu Options.............................................................................
15
Function Menu Options Continued.............................................................
16
Adjust Menu Options................................................................................
Tuning Menu Options..............................................................................
Tuning Menu Options Continued..............................................................
Parental Menu Options.............................................................................
Parental Menu Options Continued.............................................................
16
17
18
18
19-21
22
23
Troubleshooting Guide...............................................................................
Specifications...........................................................................................
Safety Notice Items
Incorrect usage may cause fire or electric shock. To prevent this, please do as
required when you are installing, using and cleaning this machine. To ensure
your safety and extend the life-span of LCD-TV, please read the following items
carefully before using:
l Please read and understand all the instructions before operation;
l Please keep this manual for later use;
l Please comply strictly with the warning instructions on the machine and
in this book;
l Please comply with the instructions provided;
l Please do not use additional devices that are not recommended by
manufacturer:
l Before operation, please make sure that the operating voltage of your unit is
correct;
l Do not place the unit on unstable, dusty and humid places;
l Never put the unit in direct sunlight or near heat sources;
l Allow enough space for proper ventilation;
l Please keep water away from the LCD-TV . If water comes in contact with the
LCD-TV, disconnect the power cord from the power source, then wipe the set
with a dry soft cloth;
l Do not remove the back cover. If service is needed, please contact an
Authorized service technician.
Front Panel Controls
2
3
4
5
1
TV/AV MENU VOL- VOL+ CH-
CH+ POWER
HLA19
HLA15
6
7
7
6
Control Panel Function
1. Power supply switch
2. TV/AV
Selects the input signals: TV/AV/S-VIDEO/PC/
COMPONENT
3. MENU Press to select the main menu
4. VOL- Volume down / Left orientation to adjust the item in the OSD
VOL+ Volume up / Right orientation to adjust the item/Press to enter
5. CH- TV channel down / to select the item in the menu
CH+ TV channel up / to select the item in the menu
6. Power indicator
Illuminates red in standby mode, illuminates green when the display is
turned on
7. Remote Sensor
Receives the signals from the remote control
Connection Options
The above figure is for reference only,
connections may differ depending upon
the models
Antenna Input
Connect cable or
antenna signals to
the TV, either direc-
tly or through your
cable box.
Earphone port
PC Audio Input
AV/S-VIDEO/
COMPONENT Audio
Input
Connect the audio
output from the pc
to the audio input port
Connect audio output
from an external device
to these jacks
Video Input
Connect video output
from an external
device to this jack
S-Video Input
Connect S-Video out
from an S-Video device
to the jacks.
DVD/DTV Input
Connect a component
video/audiodevice to
these jacks
VGA Input
Connect to the VGA
15PIN analog output
connector of a PC
display card to use set
as a PC display
Remote Control Key Functions
When using the remote control, aim it towards the remote sensor on the TV
MUTE
1
2
4
RECALL DISPLAY
EXIT
3
5
1
4
2
5
8
0
3
6
6
8
7
MTS/SAP
9
P.STD
7
9
MENU
TV/AV
10
11
CH+
CH-
VOL
-
VOL
+
12
13
15
14
CCD
SLEEP
SCAN
Illustration of the keys on the remote control:
Press to mute the sound
1. MUTE
2.
Press to turn the TV on and off
While in TV mode, press to return to the previous channel
Press to turn off the on screen display
3. RECALL
4. EXIT
Display current input signal information
5. DISPLAY
TV channel number select
6. 0-9
Select MONO,STEREO, SAP in NTSC system
7. MTS/SAP
Select picture mode: PERSONAL/STANDARD/MILD/FRESH
To display/exit the main menu
8. P.STD
9. MENU
Select TV/AV/S-VIDEO/PC/ COMPONENT
10. TV/AV
TV channel up/down or select the item of the menu
11. CH+/CH-
12. VOL+
Volume up / to select the main menu/ to adjust the item/ to
enter the submenu.
Volume down / to select the main menu/ to adjust the item
VOL-
Closed caption on/off
13. CCD
14. SCAN
Press to scan through memorized TV channels
Press to set the sleep timer
15. SLEEP
Remote Control
Installing Batteries
!
Remove the battery cover.
!
Insert two size AAbatteries matching
the +/-polarities of the battery to the +/-
marks inside the battery compartment.
Precautions
As strong light may interfere with the
signals, change yourposition to
operate the remote control if
the television cannot be turned
on or off as expected.
Make sure that there is no
obstacle between theremote
controller and televisionset.
Make sure that two AA 1.5V alkaline
batteries are loaded. The batteries
must be of the same type, must be
inserted properly, and must not be
rechargeable.
Keep the remote control
away from heat sources or
humid areas toensure
effective performance of
the remote.
Connection Instructions
Grounding
Ensure that you connect the grounding / earth wire to prevent possible
electric shock. If grounding methods are not possible, have a qualified
electrician install a separate circuit breaker. Do not try to ground the
unit by connectingit to telephone wires, lighteningrods, or gaspipes.
External Equipment Connections
Antenna Connection
- Antenna or Cable Service with a Cable Box Connections
- For optimum picture quality, adjust antenna direction if needed.
Multi-family Dwellings/Apartments
(Connect to wall antenna socket)
wall antenna
socket
Bronze Wire
RF coaxial wire (75 ohm)
VHF antenna
UHF antenna
Turn clockwise to tighten.
Bronze Wire
Be careful not to bend the bronze
wire when connecting the antenna.
outdoor
antenna
Single-family Dwellings /Houses
(Connect to wall jack for outdoor antenna)
To improve picture quality in a poor
signal area, purchase and install a
signal amplifier.
If the antenna needs to be split for two
TVs, install a 2-Way Signal Splitter
in the connections.
If the antenna is not installed properly,
contact your dealer for assistance.
NOTE: Cables shown are not included with the TV
Connection Instructions
PC Setup
You can use your LCD-TV as a monitor for your personal computer using a VGA
cable (not supplied).
Connection and use steps:
1.Read the userguide supplied with
your computer and ensure that it has
a VGAconnector;
2.Make sure that the power of the LCD
-TV and thePC are off;
3.Connect a Dtype 15-pin VGAinterface
cable ( not supplied ) to the VGAvideo
interface connector on the PC. Then
connect the other end to the VGA video
interface connector on the back of the
LCD-TV.Tighten the screwson the VGA
connectors once they are firmly
connected;
4.Turn on the power ofthe LCD-TV first,
and then turn on the power of the PC;
5.Press the INPUT button to set the video
input mode ofthe LCD-TV toPC-RGB;
6.Check the image on your TV. There may be noise associated with the resolution,
vertical pattern, contrast or brightness in PC mode. If noise is present, change
the PC mode to another resolution, change the refresh rate to another rate or
adjust the brightness and contrast on the menu until the picture is clear. If the
refresh rate of the PC graphic card can not be changed,change the PC graphic
card or consult the manufacturer of the PC graphic card.
Connection Instructions
VCR Setup
- To avoid picture noise (interference), leave an adequate distance between the
VCR and TV
Connection and use steps:
1.Read the user guide supplied with your AV devices and ensure that it has
Composite or S-Video connectors;
2.Make sure that the power of the LCD-TV and the AV device are off;
Connection Option 1
Set VCR output switch to 3 or 4 and then
tune TV to the same channel number.
Connection Option 2
1. Connect the audio and video cables from
the VCR's output jacks to the TV input jacks,
as shown in the figure.
When connecting the TV to VCR, match
the jack colors (Video = yellow,Audio
Left = white,and Audio Right = red).
If you connect an S-VIDEO output from
VCR to the S-VIDEO input, the picture
quality is improved; compared to conne-
.
cting a regular VCR to the Video input.
2. Insert a video tape into the VCR and press
PLAY on the VCR. (Refer to the VCR owner
manual.)
s
3.Turn on the power of the LCD-TV first ;
and then turn on the power of the AV
device;
4.Press the TV/AV button to set the video
input mode of the LCD-TV to S-VIDEO
mode or AV mode.
1
2
VCR
Connection Instructions
Cable TV Setup
- After subscribing to a cable TV service from a local provider you can watch cable
TV programming. The TV cannot display TV programming unless a TV tuner
device or cableTV converter box is connectedto the TV.
- For furtherinformation regarding cableTV service, contact your localcable TV
service provider(s).
Connection Option 1
1. Select 3 or 4 with channel switch on cable
box.
2. Tune the TV channel to the same selected
output channel oncable box.
3. Select channelsat the cablebox or with
the cable box remote control.
Connection Option 2
1. Connect the audio and video cables from
the Cable Box'soutput jacks tothe TV
input jacks, as shown in the figure. When
connecting the TV to a Cable Box, match
the jack colors
(Video = yellow, Audio Left = white, and
Audio Right = red).
2. Select theinput source byusing the TV/AV
button on the remote control.
3. Select your desired channel with the
remote control forcable box.
External AV Source Setup
How to connect
Connect the audio and video cables from
the external equipment's output jacks to the
TV input jacks, as shown in the figure.
When connecting the TV to external equip-
ment, match the jack colors (Video = yellow,
Audio Left =white, andAudio Right =red).
How to use
1. Select theinput source byusing the TV/AV
button on the remote control.
2. Operate the corresponding external equi-
pment. Refer to external equipment ope-
rating guide.
Basic Operating Instructions
Turn on the LCD-TV
When the POWER
button is pressed and the LCD-TV
is turned on, the indicator light on the front of the LCD-TV
changes from red to green. When the LCD-TV is turned off
using the power button, the LCD-TV will go into standby
mode and the indicator light turns red.
TV
AV
S-VIDEO
PC
COMPONENT
Each time you press the TV/AV button, TV, AV, S-VIDEO, PC,
COMPONENT will appear on the screen in order.
Audio Control
1.Press the VOL+ button to increase the volume. A number will appear
on screen indicating the volume level.
2.Press the VOL- button to decrease the volume. A number will appear
on screen indicating the volume level.
Mute
1.Press the MUTE button to mute the sound temporarily. A mute icon
appears on the screen.
2.Press the MUTE button or VOL+/VOL- again to restore the sound.
The mute icon disappears.
Basic Operating Instructions
Select the TV Channel You Want
You can use the number keys on the remote control to directly select TV
channels.
The LCD-TV can store up to 181 channels , and you can press the keys on the
remote control or on the panel to make a selection.
Picture Mode
Press P.STD button on the remote control for menu display . For desired mode as
follows:
PERSONAL STANDARD MILD FRESH
Program Scan
Press SCAN button to scan through all the memorized TV channels. The scan
will pause for about 2 seconds on each channel .
If you want to stop the function during auto scanning, simply press the SCAN
button again .
Sleep
Press SLEEP button to setthe time :SLEEP 240 MIN-SLEEP 180 MIN-
SLEEP 120 MIN -SLEEP 90 MIN-SLEEP 60 MIN-SLEEP 45 MIN-SLEEP 30 MIN-
SLEEP 15 MIN-SLEEP 10 MIN-SLEEP 5 MIN-SLEEP 0 MIN
This feature allows you to turn off the television after a pre-selected
number of minutes.
Menu Operations
* In this manual, the OSD (On Screen Display) may differ from your TV
These are examples to illustrate the TV's operation.
Press TV/AV to select the input source. The menu for each source may be
different .
1. Press MENU button to display the main menu, and VOL+/VOL-to select the
main menu .
2. Press CH+/CH- to scroll through the parameters
3. Press VOL+/VOL- buttons to make changes to the parameters
4. Press the EXIT button to exit the menu
Picture Menu Options
Picture quality can be adjusted for any input separately .
The picture qualityon the screencan be adjustedas follows:
1. Press MENU button and VOL+/VOL- until the followingmenu appears
on the screen.
2. Press CH+/CH- button to enterthe picture menuand to goup and downto
select the desired option .
PC MENU
COMPONENT MENU
PICTURE
PICTURE
BRIGHTNESS
CONTRAST
SHARPNESS
COLOR
NOISE REDUCTION
H POSITION
V POSITION
30
30
2
BRIGHTNESS
CONTRAST
SHARPNESS
COLOR TEMP
30
30
2
30
COOL
MID
0
0
30
COLOR TEMP
NEUTRAL
TV/AV/S-VIDEO MENU
PICTURE
BRIGHTNESS
CONTRAST
50
50
2
50
MID
SHARPNESS
COLOR
NOISE REDUCTION
NEUTRAL
50
COLOR TEMP
HUE
Only available inNTSC system
Note: Symbols ontop of themenu in thismanual may differ from theactual set display
Menu Operations
Picture Menu Options continued
3.Press VOL+/VOL- button to increase and decrease the level to adjust the
selected option to your preference .
4. Repeat step 2 and step 3 until desired picture quality has been achieved .
Function:
BRIGHTNESS :Adjust the brightness of the picture . By increasing the level, it
will lighten the dark parts of the picture and by decreasing the level it will
darken the lighter parts of the picture.
CONTRAST : Adjust the contrast of the picture . The contrast becomes higher as
the number increases.
SHARPNESS : Adjust the amount of the detail enhancement , the image
sharpness rises as the number increases (By increasing the level, it will show
cleaner and clearer images and by decreasing the level, it will make the picture
smoother).
COLOR : Press VOL+/VOL- to adjust the color
HUE : Adjust the tone of the picture . This will appear and can be adjusted only in
NTSC mode
COLOR TEMP : Press to select the color temperature from NEUTRAL/WARM/COOL
NOISE REDUCTION: Adjust the quality of the picture by selecting OFF,LOW,MID,
HIGH.
H POSITION : Picture horizontal adjust
V POSITION : Picture vertical position adjust .
Sound Menu Options
Sound can be adjusted for any input as follows:
1. Press MENU and VOL+/VOL- button until the following menu appears on
the screen
SOUND
50
50
30
70
VOLUME
BALANCE
BASS
TREBLE
AUDIO MODE
AVL
VOICE
OFF
Menu Operations
Sound Menu Options continued
You can adjust sound options to the levels you prefer.
2. Press CH+/CH- button to enterthe audio menuand to goup and downto
select the desired option .
3.Press VOL+/VOL- button to increase and decrease the level to adjust the
selected option toyour preference .
4. Repeat step 2 and step 3 until desired sound quality has been achieved .
Function :
VOLUME :Adjust the volumeof your TV
BALANCE : Adjust the balanceof the audiooutput from leftto right . When
indication value of balance increases toward 100 , sound from the left speaker
becomes weaker . When indication valueof balance decreasestoward 0 ,
sound from the right speaker become weaker .
BASS : Adjust the bass of the sound . Can only be adjusted under PERSONAL mode .
TREBLE : Adjust the trebleof the sound. Can onlybe adjusted underPERSONAL
mode .
AUDIO MODE : Press VOL+/VOL- to select amongPERSONAL, VOICE, MUSIC
and THEATRE .
AVL: Automatic Volume Limit Control reduces the effect of high volumes by
limiting the same volume peaks across all channels .
Menu Operations
Function Menu Options
Menu Language Selection:
The OSD menus can be shown onscreen in the various languages. First select the
system language.
1. Press MENU button and VOL+/VOL- until the followingmenu appears
on the screen.
FUNCTION
INPUT SOURCE
LANGUAGE
CC MODE
TV
ENGLISH
OFF
CC CAPTION
PARENTAL
OFF
BLUE SCREEN
ASPECT RATIO
RESET
ON
FULL SCREEN
2. Press CH+/CH- button to enterthe function menuand to goup and downto
select the desired option .
3.Press VOL+/VOL- button to increase and decrease the level to adjust the
selected option toyour preference .
4. Repeat step 2 and step 3 until desired settings have been achieved .
Functions:
1. INPUT SOURCE : Displaycurrent mode . There are TV , AV ,S-VIDEO, PC,
COMPONENT to display .
2. LANGUAGE :Press VOL+/VOL- to select the OSD language.
3. CC MODE:Press VOL+/VOL- to select amongOFF, ON WHEN MUTE, ON.
OFF: Means theCC MODE isturned off.
ON WHEN MUTE: Means there will be CC CAPTION when the sound is mute.
ON: Means the CC MODE is turned on.
4. CC CAPTION :Press VOL+/VOL-buttons to selectthe Closed Captionoptions.
Closed Captioning helpsthe hearing impairedwith the broadcastprogram,
as well as helping children learn how to read. A builtin decoder displays the
audio portion of a program as text on the screen when this option is selected.
OFF: When OFFis displayed onTV, it means CCCAPTION is turnedoff.
CC1: When CC1is displayed on TV means CC CAPTION is turned on.
CC2 to CC4: For other modes of video related broadcast information.
TT1: For program guide andother information displayedby broadcasters.
(This blocks alarge portion ofthe picture onyour screen).
Menu Operations
Function Menu Options Continued
TT2 to TT4 :For other modes of information displayed by broadcasters.
(This blocks a large portion of the picture on your screen).
IMPORTANT: Closed captioning availability entirely depends on broadcasters
supplying the signal. Therefore, closed captioning might not always be
available and language availability will differ by broadcast.
Note: Select CC1 for full translation of the primary language such as English in
your area. Select CC2 for secondary language translation such as French or
any other language that may be broadcast in your area.
5.BLUE SCREEN: Press VOL+/VOL- to select ON or OFF. To set ON, the screen
will turn blue after 3 seconds if there is no signal.
6.ASPECT RATIO: Press to select display mode.(FULL SCREEN and ZOOM
for model HLA15; FULL SCREEN ,4:3,16:9,CINEMAand ZOOM for model
HLA19)
7. RESET : Press VOL+ to reset some settings to the factory default .
Adjust Menu Options
1. Press MENU and VOL+/VOL- button until the following menu appears on the
screen
ADJUST
AUTO CONFIG
PHASE
CLOCK
H POSITION
V POSITION
0
50
50
50
Note: This menu appears only in PC mode .
2. Press CH+/CH- button to enter the adjust menu and to go up and down to
select the desired option .
3.Press VOL+/VOL- button to increase and decrease the level to adjust the
selected option to your preference .
4. Repeat step 2 and step 3 until desired quality has been achieved .
Functions:
AUTO CONFIG : Automatically adjusts picture location frequency and phase
parameters .
PHASE : Removes any horizontal distortion and clears or sharpens the displayed
characters .
CLOCK : Adjust the TFT-LCD to match the PC input source clock frequency
Menu Operations
H POSITION : Picture horizontal position adjust
V POSITION : Picture vertical position adjust .
Tuning Menu Options
1. Press MENU and VOL+/VOL- button until the following menu appears on the
screen
TUNING
CHANNEL
1
CHANNEL LABEL
CHANNEL LOCK
SKIP
OFF
OFF
ON
AFC
FINE TUNE
ANTENNA
AUTO PROGRAM
CATV
Note: This menuappears only inTV mode .
2. Press CH+/CH- button to enter the tuning menu and to go up and down to
select the desired option .
3.Press VOL+/VOL- button to increase and decrease the level to adjust the
selected option to your preference .
4.Repeat step 2 and step 3 until desired settings have been achieved .
Functions:
1. CHANNEL : Press VOL+/VOL-to go up and down to set the channel position.
The display will show the current playing channel.
Channel Coverage by Antenna:
Antenna Type
VHF
UHF
Channel Range
2-13
14-69
CATV
1-125
2.CHANNEL LABEL: Press VOL+ to enter it , then press VOL+/VOL- to select the
position you want to edit and press CH+/CH- to input the emblem such as character
and so on.(There are 8 position for you to edit totally)
3.CHANNEL LOCK: Allows you to lock the channel inputs if ON is selected.
Menu Operations
Tuning Menu Options Continued
4.SKIP : If you want skip a channel , press VOL+/VOL- to select ON , and this
channel will be skipped next time when you press CH+/CH- . You can press
the digit buttons to select the channel . If you want to restore the channel , select
OFF.
5. AFC : Auto frequency control. Select ON toimprove image quality .
6. FIN E TUNE : If the image and / or sound received is not very good , you can
press CH+/CH- to select FINE TUNE in the menu . Then , press VOL+/VOL-
button to adjust and improve the image quality. Do notuse this feature unless
reception is poor.
7. ANTENNA: Press VOL+/VOL- button to select AIR (VHF and UHF) and CATV
reception preference.
8. AUTO PROGRAM : Auto search and program channels .Press the VOL+ button to
start to search the channel and the following menu will appears on the screen:
AUTO PROGRAM
NO
YES
Press VOL+/VOL- or CH+/CH-to select YES or NO, and MENU to confirm.
You could press MENU or EXIT to stop the search.
Note: The AUTO PROGRAM function will scan the channels on the selected
ntenna input. If the TV is connected to cable, please select CATV under
' ANTENNA ' sub menu.
Parental Menu Options
1. Press the MENU and VOL+/VOL- button until FUNCTIONmenu appears
on the screen .
2. Press CH+/CH- button to select PARENTALand VOL+ to enter.
PASSWORD----
3. Then input the password 0000. It will bring parental menu display on the
screen. You will see the ollowing menu on your screen:
PARENTAL
CHILD LOCK
MPAA
PG RATING
PG CONTENTS
CAN. ENGLISH
CAN. FRENCH
CHANGE PASSWORD
OFF
PG
TV-14
--DV--
C8+
8+
Menu Operations
Parental Menu Options Continued
This function enables you to block certain TV channels in accordance to the
requirements established by the FCC.
2. Press CH+/CH- button to enter the PARENTAL menu and to go up and down to
select the desired option .
3.Press VOL+/VOL- button to go into PG RATING and MPAA
Press VOL+/VOL- button to setthe CHILD LOCK ON and PARENTAL LOCK OFF.
4. Repeat step 2 and step 3 until desired quality has been achieved .
CHILD LOCK: Child Lock off means the lock function is turned off . If the
Child Lock is in "off" mode then function will not be active to accept the
Parental Guidance signal. Child Lock on means the lock function is turned on. If the
lock is in the "on" mode then it actively accepts the Parental Guidance signal.
MPAA: When MPAA rating is selected, you can select OFF/G/PG/PG 13
R/NC17/X .
PG RATING:Select the TV Rating option. You can select from OFF/TV-Y/TV-Y7/
TV-G/TV-PG/TV-14/TV-MA.
PG CONTENTS: Press to set the grade of the program . When there is this
grade of program , this program will not be display .
CAN. ENGLISH: Select this option. You could select from OFF/E/C/C8+/G/PG/
14+/18+ .
CAN. FRENCH: Select this option. You could select from OFF/E/G/8+/13+/16+/
18+ .
CHANGE PASSWORD: The "Default Password" preset by the manufacturer is
"0000" . Ifyou want to change the preset password to your own password, just
choose any four digits that can be easily remembered and set. Once you set
password for a particular channel, that channel will be blocked.
Menu Operations
Parental Menu Options Continued
PARENTAL LOCK TECHNOLOGY:
The "P.L. Technology" allows you to use U.S. and Canadian Movies and TV
PROGRAMS Guide ratings to block certain types of TV programs and movies.
To clearly understand TV program rating codes, read the following information:
U.S. TV Program Ratings
NR: Not Rated-this means that programs are not rated or rating does not apply.
TV-Y: For all children - these types of rated programs are designed for a very young
audience, including children from ages 2-6.
TV-Y7: Directed towards older children - this type of rated programs may include
comedic violence of mild physical, or may frighten children under the age of 7.
TV-G: General audience - these types of rated programs contains little or no
violence, no strong language, and little or no sexual dialogue and situations.
TV-PG:Parental Guidance Suggested-this type of rated programs may contain
limited violence, some suggestive sexual dialogue and situations, and rare
language.
TV-14: Parents strongly cautioned-these types of rated programs may contain sexual
content, strong language and more intense violence.
TV-MA:Mature audience only these types of rated programs may contain sexual
violence, explicit sexual content and profane language.
FANTASY VIOLENCE: This type of rated programs contains Fantasy and cartoon violence.
VIOLENCE: This type of rated programs contains violence.
SEX: This type of rated programs contains sex.
LANGUAGE: This type of rated programs contains offensive language.
DIALOGUE: This type of rated programs contains dialogue with sexual content.
Menu Operations
Parental Menu Options Continued
To understand clearly about movie rating codes, read the following list:
U.S. Movie Rating Chart
NR: This means movie is not rated yet. It is pending government rating approval.
G:
General Audience-this type of movie rating means all ages admitted to see
the movie.
PG 13:Parents Strongly Cautioned - this type of movie rating means some material
may not be appropriate for children under13.
R:
Restricted- This type of movie rating means children under 17 of age require
to be with parent or guardian.
NC 17:This type of movie rating means no one 17 and under admitted.
X: This type of movie rating means adults only.
To clearly understand Canadian program rating codes, read the
following list:
Canadian English Rating Chart
E: These types of programs are exempt from the rating system. Exempt
programming includes: news, sports, documentaries, talk shows, music
videos, and variety of other programs.
C: This type of programming is intended for children under age 8. There is no
offensive language, nudity or sexual content.
C8+:These types of rated programs are generally considered acceptable for children
8 years and over. There is no profanity, nudity or sexual content.
G: These types of rated programs are generally suitable for all audiences.
PG: Parental Guidance Suggested -in these types of rated programs, some material
may not be suitable for children.
14+: In these types of rated programs, some content may not be suitable for viewers
under the age of 14.Parents are strongly cautioned not to have their children
view 14+ rated programs by pre-teens and early teens.
18+: Adults Only-these types of rated programs are only for adult viewers only.
Troubleshooting Guide
To assist in location possible faults use help guide below.
Troubleshooting
Verify thatthe television isproperly plugged in.
Verify thatthe television isproperly supplied withpower.
Verify thatelectricity is available.
No picture, no sound
Verify that correct signals are input.
Press TV/AV button to change signal input to TV input.
Restart the television of power supply is interrupted.
Blank screen
Press MUTE buttonand verify ifMute mode ison.
Switch to anotherchannel and verifyif the sameproblem
happens.
No sound
Press VOL+ buttonto see ifthe problem canbe solved.
Verify thatsound system isfunctional. Refer tochapter on
adjusting.
Poor sound
Verify thatcorrect channel isselected.
Adjust the antenna.
Make adjustments byFINE TUNE
No picture in some
channel
Verify that the same problem exists in other channels.
Check picture and sound systems.
Refer to relative instructions in the Manual for color
adjust.
No color for some channel
program (black and white)
Verify thatthe antenna iscorrectly connected.
Verify thatthe antenna isin good condition.
Make fine adjustmentof channel.
Spots with some or
all pictures
Disconnect the televisionfrom power supplyand, 10
seconds later, reconnect to thepower supply.
If the problemstill exists, contactan authorized
service depot fortechnical assistance.
Abnormal functioning
Note:
1.If the fault can not be repaired using the above guide consult with your local authorized
service center.
2.The TV set must only be repaired by a qualified registered service person. Never attempt to
remove the backcover as theTV set has dangerous voltageslevels inside thatmay be
fatal or causefire.
Specifications
Specifications of the television that you have just purchased may
vary from the information in this table due to technical innovations.
Model
HLA15
HLA19
Picture, sound
system
NTSC-M, PAL/N, PAL/M
1.5W+1.5W
Audio output
AV input PC input S-VIDEO input PC audio input
Headphone output YPbPr input Antenna input
External input port
~100-240V 50/60Hz
Power requirements
Power consumption
Temperature
50W
60W
Working:+5 ~+35
Storage:-15 ~+45
Working:20%~80%
Storage:5%~90%
Humidity
Remote control
Batteries
User manual
Accessories
NOTE
Design and specifications are subject to change without notice.
Dimensions quoted in this manual are approximate.
V0.1
0090508051E
|