Harbor Freight Tools Carpet Cleaner 99989 User Manual

20” Rolling FlooR Sweep  
Model 99989  
ASSeMbly, opeRAting, And MAintenAnce  
inStRuctionS  
Diagrams within this manual may not be drawn proportionally.  
Due to continuing improvements, actual product may differ slightly from the product described herein.  
®
distributed exclusively by Harbor Freight tools .  
3491 Mission Oaks Blvd., Camarillo, CA 93011  
Visit our website at: http://www.harborfreight.com  
Read this material before using this product.  
Failure to do so can result in serious injury.  
SAVe tHiS MAnuAl.  
©
®
Copyright 2008 by Harbor Freight Tools . All rights reserved. No portion of this  
manual or any artwork contained herein may be reproduced in any shape or form  
without the express written consent of Harbor Freight Tools.  
For technical questions or replacement parts, please call 1-800-444-3353.  
 
4. Stay Alert - Watch what you are  
doing. Use common sense. Do not  
operate Tool when you are tired.  
that it will operate properly and per-  
form its intended function. Check for  
alignment of moving parts, binding  
of moving parts, breakage of parts,  
mounting, and any other condition  
that may affect its operation. A guard  
or other part that is damaged should  
be properly repaired or replaced by a  
qualified technician unless indicated  
elsewhere in this manual.  
5.  
wear thick jeans and  
steel-toed work boots to  
help prevent injury  
caused by flying debris.  
6. Read and adhere to all safety  
precautions provided by the manu-  
facturer of your dust collection  
system.  
SAVe tHeSe  
Rolling Sweep use and care  
inStRuctionS.  
1. Keep children Away - All visitors  
should be kept at a distance from  
work area.  
Specifications  
Hose Size  
Accepts 4” Dust Collector Hose  
20” Wide  
Nozzle Size  
Dimensions  
2. When servicing use only identical  
replacement parts.  
57” L x 20” W  
3. Use Right Tool - Do not use Tool for  
any job except that for which it is  
intended.  
unpAcKing  
When unpacking, check to make sure  
that the item is intact and undamaged. If  
any parts are missing or broken, please  
call Harbor Freight Tools at the number  
shown on the cover of this manual as soon  
as possible.  
4. Do not Force Tool - It will do the  
job better and with less likelihood  
of injury at the rate for which it was  
designed.  
5. Store Idle Tools Indoors - When not in  
use, Tools should be stored indoors  
in dry, and high or locked-up place  
- out of reach of children.  
Set up inStRuctionS  
6. Maintain Tool With Care - Keep tool  
maintained to reduce the risk of  
injury. Follow instructions for lubricat-  
ing and changing accessories. Keep  
handles dry, clean, and free from oil  
and grease.  
Read the entiRe  
iMpoRtAnt SAFety  
inStRuctionS section at the  
beginning of this manual  
including all text under  
subheadings therein before set  
up or use of this product.  
7. Check Damaged Parts - Before  
further use of the Tool, a guard or  
other part that is damaged should  
be carefully checked to determine  
SKU 99989  
For technical questions, please call 1-800-444-3353.  
Page 3  
 
Functions  
to Attach a Flexible Vacuum Hose  
1. This tool can be used to vacuum dust 1. The Swivel Connecting Tube (5) is  
and small debris from a shop floor,  
when a 4” flexible hose (not included)  
from the shop dust collection system  
is attached.  
designed to accept a standard 4” flex-  
ible collection hose (not included).  
2. Insert your flexible hose into the Con-  
necting Tube (5). If necessary, use a  
band clamp or adapter (not included)  
to secure the hose.  
note: For additional information regarding  
the parts listed in the following pages,  
refer to the Assembly Diagram near  
the end of this manual.  
operating the Sweep  
1. The Handle Assembly (8, 13) is de-  
signed to swivel on the Connecting  
Tube (5).  
Assembly  
1. Upper Handle Section (13) must be  
attached to Lower Handle Section (8)  
prior to use.  
2. To adjust the swivel angle, loosen  
the Knob (4), move the Handle to the  
desired position, and retighten the  
Knob.  
2. Insert Upper Handle Section (13) into  
Lower Handle Section (8) and fasten  
together using Phillips Head Screw  
(15).  
3. The Supporting Tube (11) provides  
support by pushing on the top of the  
Dust Hood (1) as the tool is used.  
opeRAting inStRuctionS  
4. After attaching the 4” flexible hose,  
turn on the shop dust collection sys-  
tem (not included). The Sweep will  
now operate.  
Read the entiRe  
iMpoRtAnt SAFety  
inFoRMAtion section at the  
beginning of this manual  
including all text under  
5. Roll the sweep along the shop floor to  
pick up dust and small debris.  
subheadings therein before set  
up or use of this product.  
6. Pick up large debris by hand to pre-  
vent clogging the Dust Hood (1). If  
the Dust Hood becomes clogged,  
turn off the dust collection system and  
clear the Dust Hood.  
1. Before operating the Rolling Sweep,  
put on ANSI-approved safety goggles  
and other safety gear which are sold  
separately.  
SKU 99989  
For technical questions, please call 1-800-444-3353.  
Page 4  
 
pleASe ReAd tHe Following  
MAintenAnce And  
cAReFully  
SeRVicing  
THe MANUFACTUReR AND/OR DISTRIBUTOR  
HAS PROvIDeD THe PARTS LIST AND  
to pReVent  
SeRiouS injuRy  
FRoM tool  
ASSeMBLy DIAgRAM IN THIS MANUAL AS  
A ReFeReNCe TOOL ONLy. NeITHeR THe  
MANUFACTUReR OR DISTRIBUTOR MAKeS  
ANy RePReSeNTATION OR WARRANTy OF  
ANy KIND TO THe BUyeR THAT He OR SHe  
IS qUALIFIeD TO MAKe ANy RePAIRS TO THe  
PRODUCT, OR THAT He OR SHe IS qUALIFIeD  
TO RePLACe ANy PARTS OF THe PRODUCT.  
IN FACT, THe MANUFACTUReR AND/OR  
DISTRIBUTOR exPReSSLy STATeS THAT  
ALL RePAIRS AND PARTS RePLACeMeNTS  
SHOULD Be UNDeRTAKeN By CeRTIFIeD  
AND LICeNSeD TeCHNICIANS, AND NOT By  
THe BUyeR. THe BUyeR ASSUMeS ALL RISK  
AND LIABILITy ARISINg OUT OF HIS OR HeR  
RePAIRS TO THe ORIgINAL PRODUCT OR  
RePLACeMeNT PARTS THeReTO, OR ARISINg  
OUT OF HIS OR HeR INSTALLATION OF  
RePLACeMeNT PARTS THeReTO.  
FAiluRe: do not use damaged  
equipment. if abnormal noise  
or binding occurs, have the  
problem corrected before  
further use.  
Procedures not specifically  
explained in this manual must  
be performed only by a  
qualified technician.  
cleaning, Maintenance, and  
lubrication  
1. beFoRe eAcH uSe, inspect the  
general condition of the Tool. Check  
for loose screws, misalignment or  
binding of moving parts, cracked or  
broken parts and any other condition  
that may affect its safe operation.  
2. AFteR uSe, clean external surfaces  
of the Tool with clean, moist cloth.  
3. Store this tool in a dry location away  
from moisture or corrosive materials.  
Record product’s Serial number Here:  
note: If product has no serial number, record month and year of purchase instead.  
note: Some parts are listed and shown for illustration purposes only, and are not avail-  
able individually as replacement parts.  
SKU 99989  
For technical questions, please call 1-800-444-3353.  
Page 5  
 
ASSeMbly diAgRAM  
part # description  
Qty.  
part # description  
Qty.  
1
2
3
4
5
6
Dust Hood  
1
2
2
1
1
1
9
Lock Nut m4  
1
1
1
1
1
1
1
Caster Wheel 1.5”  
Lock Nut 3/8”  
10  
11  
12  
13  
14  
15  
Phillips Head Screw m4 x 35  
Supporting Tube  
Cap 1/2”  
Knob 3/8” x 1-1/2”  
Connecting Tube  
Upper Handle Section  
Handle grip  
Phillips Head Screw 3/16” x  
3/8”  
Phillips Head Screw 1/4” x  
3/8”  
7
8
Cap 1”  
1
1
Lower Handle Section  
SKU 99989  
For technical questions, please call 1-800-444-3353.  
Page 6  
 
liMited 90 dAy wARRAnty  
Harbor Freight Tools Co. makes every effort to assure that its products meet high  
quality and durability standards, and warrants to the original purchaser that this prod-  
uct is free from defects in materials and workmanship for the period of 90 days from  
the date of purchase. This warranty does not apply to damage due directly or indirectly,  
to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities,  
criminal activity, improper installation, normal wear and tear, or to lack of maintenance.  
We shall in no event be liable for death, injuries to persons or property, or for incidental,  
contingent, special or consequential damages arising from the use of our product. Some  
states do not allow the exclusion or limitation of incidental or consequential damages, so  
the above limitation of exclusion may not apply to you. THIS WARRANTy IS exPReSS-  
Ly IN LIeU OF ALL OTHeR WARRANTIeS, exPReSS OR IMPLIeD, INCLUDINg THe  
WARRANTIeS OF MeRCHANTABILITy AND FITNeSS.  
To take advantage of this warranty, the product or part must be returned to us with  
transportation charges prepaid. Proof of purchase date and an explanation of the com-  
plaint must accompany the merchandise. If our inspection verifies the defect, we will ei-  
ther repair or replace the product at our election or we may elect to refund the purchase  
price if we cannot readily and quickly provide you with a replacement. We will return re-  
paired products at our expense, but if we determine there is no defect, or that the defect  
resulted from causes not within the scope of our warranty, then you must bear the cost  
of returning the product.  
This warranty gives you specific legal rights and you may also have other rights  
which vary from state to state.  
3491 Mission Oaks Blvd. • PO Box 6009 • Camarillo, CA 93011 • (800) 444-3353  
SKU 99989  
For technical questions, please call 1-800-444-3353.  
Page 7  
 

Graco Baby Swing 1759162 User Manual
Graco Blood Glucose Meter 3A1696C User Manual
Graco Heat Pump 230V User Manual
HANNspree Flat Panel Television T262 User Manual
Hotpoint Range LEB316 User Manual
HP Hewlett Packard Camcorder V5040u User Manual
HP Hewlett Packard Life Jacket tc3100 User Manual
Hunter Fan Baby Accessories 24756 User Manual
IBM Computer Monitor L190P User Manual
Ikelite Network Card iTTL User Manual